As a Florida homeowner, you are encouraged to perform periodic inspection to ensure that your home is free from water damage. The effects resulting from damage caused by water to your home can be astronomical and can indeed weigh heavily on your finances. Mold growth and structural failure are but a few noticeable effects of water damage and so before you call a repair contractor, it is important to understand all the signs. Because many people are not good with this, this article therefore comes in handy by explaining all the tips for inspecting water damage in your home.

If you don’t feel comfortable repairing and restoring your property due to water damage, then call the Restorational.com team today.

The tips are the following.

Water Damage

Gutters and downspouts

Gutters and downspouts are important as they draw rainwater or melting snow safely away from the house. They should always be kept in good repair and free of debris and leaves. In addition, they should empty at least 10 ft away from the house foundation. A sure indicator of water damage would be shown by overflowing gutters and when this happens, it is advisable you install additional downspouts.

Vents

Every vent in the house should be unclogged and be in good working condition with a proper hood and boot. In addition, all the vents need to exhaust to the exterior, away from door and windows. Vents can be used as a way of inspecting water damage in your home. Always be sure you check the drier vents that terminate in crawl spaces or attics, as they are known to deposit moisture that facilitates wood decay and encourages mold growth. It is also advisable to check the rubber seals on vent boots as they tend to degrade or crack over time, leading to water seepage.

Attics

Attics should be inspected for any holes or air leaks. Normally, water damage in the attic would be indicated by the presence of water stains at the bottom side of the roof sheathing and roof rafters. These areas should therefore be thoroughly checked.

Humidity

Humidity can be a way of checking for water damage in your home. Naturally, excessive humidity leads to water damage and the signs range from wet stains on ceilings and walls, condensation on windows as well as musty odors. As a remedy for excessive humidity, home owners are encouraged to ensure their HVAC systems are properly sized for the homes and in good working condition. Another remedy for excessive humidity is the humidistat, though the equipment should only be used in homes that go unoccupied for extended periods of time. When using it, ensure you set it to 58 RH.

Flashing

The presence of water damage can also be detected by inspecting the metal strips that protect edges of doors, windows, roofs and chimneys, alternatively referred to as flashing. The presence of cracked calk or rust spots on the flashing would be a sure indicator of water damage.

Walls

The state of the walls, both interior and exterior, can be useful in determining the extent of water damage in your home. The signs to look out for include cracks on the walls, bowing sections on the walls as well as peeling paint. Peeling paint may be a sign of mild water damage, especially if the paint used was water-based. On the other hand, wall cracks and bowing walls are serious threats of water damage and should therefore be addressed with the urgency they deserve.

In as much as these inspection points may be tackled by most home owners, professionals highly recommend you seek a competent and trusted handyman to help with the same.

References:
https://en.wikipedia.org/wiki/Water_damage_restoration